Saturday, March 29, 2008

EEStor Announces Two Key Production Milestones; 15 kWh EESU on Track for 2007

EEStor, the developer of a new high-power-density ceramic ultracapacitor (the Energy Storage Unit—EESU), has broken a long public silence and announced reaching two key production milestones. First, its automated production line has been proven to meet the requirements for precise chemical delivery, purity control, parameter control and stability.

Second, EEStor has completed the initial milestone of certifying purification, concentration, and stability of all of its key production chemicals—notably the attainment of 99.9994% purity of its barium nitrate powder.

The independent 3rd party chemical analysis was completed by Southwest Research Institute, Inc. located in San Antonio, Texas under contract with EEStor, Inc.

With these milestones completed, EEStor is now in the process of producing composition-modified barium titanate powders on its automated production line, and is moving toward completing its next major milestone of powder certification.

The company anticipates that the relative permittivity of the current powder will either meet and/or exceed 18,500, the previous level achieved when EEStor produced prototype components using it engineering level processing equipment.

The EEStor ESU is projected to offer up to 10x the energy density (volumetric and gravimetric) of lead-acid batteries at the same cost. In addition, the ESU is projected to store up to 1.5 to 2.5 times the energy of Li-Ion batteries at 12 to 25% of the cost.

According to the company’s initial patent, the EESU is based on a high-permittivity composition-modified barium titanate ceramic powder. This powder is double coated with the first coating being aluminum oxide and the second coating calcium magnesium aluminosilicate glass.

The EESU alternates multilayers of nickel electrodes and the high-permittivity powder. The resulting parallel configuration of components has the capability to store electrical energy in the range of 52 kWh, according to the document, with weight for a unit of that capacity in the range of 336 pounds (152 kg).

According to EEStor, the EESU will not degrade due to being fully discharged or recharged, and also can be rapidly charged without damaging the material or reducing its life. The cycle time to fully charge a 52 kWh EESU would be in the range of 4 to 6 minutes with sufficient cooling of the power cables and connections.

The first commercial application of the EESU is intended to be used in electric vehicles under a technology agreement with ZENN Motors Company. (Earlier post.) EEStor says that it remains on track to begin shipping production 15 kWh Electrical Energy Storage Units (EESU) to ZENN Motor Company in 2007 for use in their electric vehicles.

The production EESU for ZENN Motor Company is designed to function to specification in operating environments as severe as -20° to +65° degrees Celsius, will weigh less than 100 pounds, and will have ability to be recharged in a matter of minutes.

http://www.greencarcongress.com/2007/01/eestor_announce.html

Kleiner Perkins' Latest Energy Investment EEStor Inc

VC firm Kleiner Perkins Caufield & Byers in July led a $3 million preferred stock investment in EEStor Inc., a Cedar Park, Texas startup that is developing breakthrough battery technology.

The company was founded in 2001 by Richard D. Weir, Carl Nelson, and Richard S. Weir, who have backgrounds as senior managers in disk-storage technology at such companies as IBM and Xerox PARC. They previously co-founded disk-storage startup Tulip Memory Systems, where they won 16 U.S. patents.

According to a May, 2004 edition of Utility Federal Technology Opportunities, an obscure trade newsletter, EEStor claims to make a battery at half the cost per kilowatt-hour and one-tenth the weight of lead-acid batteries. Specifically, the product weighs 400 pounds and delivers 52 kilowatt-hours. (For battery geeks: "The technology is basically a parallel plate capacitor with barium titanate as the dielectric," UFTO says.) No hazardous or dangerous materials are used in manufacturing the ceramic-based unit, which means it qualifies as what Silicon Valley types call "cleantech."

As of last year, EEStor planned to build its own assembly line to prove the battery can work and then license the technology to manufacturers for volume production, UFTO says. Selling price would start at $3,200 and fall to $2,100 in high-volume production. Of course, all of this may have changed since KPCB got involved.

KPCB's investments are closely watched because the firm has made some of the most successful bets in VC history (Google, Amazon.com, Netscape, AOL, etc.). Energy investments carry a little extra risk for the firm since it is relatively new to the sector. Speaking at Stanford University in February, KPCB general partner John Doerr said the firm had made four energy investments so far, including fuel-cell maker Ion America. It will be interesting to watch how these companies develop.

http://www.businessweek.com/the_thread/dealflow/archives/2005/09/kleiner_perkins_1.html

Lockheed signs deal with EEStor

Lockheed Martin has signed a deal with EEStor to try to integrate the ultracapacitor start-up's electrical energy storage units into the defense contractor's products.

Financial terms of the agreement, announced Wednesday, were not disclosed.

EEStor is developing a ceramic battery chemistry that could provide 10 times the energy density of lead acid batteries at about a tenth of the weight and volume, according to Lockheed. A Lockheed spokesman said the company is interested in energy storage systems a soldier can carry, but also car batteries and energy systems for remote buildings.

Lockheed will spend most of the year evaluating samples it gets from EEStor and, if all goes well, it can start incorporating them into products. EEStor will begin to conduct qualification testing and mass production of the units in late 2008. As part of the contract, Lockheed will have the exclusive right to use EEStor products in the homeland security market.

The company also announced that former Dell Chairman Mort Topfer has joined its board. Last year, it was reported that Topfer left the board. The Toronto Star broke that story. (I wrote a story repeating what the Star said, citing the newspaper.) Reporter Tyler Hamilton says that Topfer did leave, but is now rejoining.

This marks another unexpected turn in the EEStor saga. The company has devised an energy storage device that it says can change the battery industry. Zenn Motors of Canada is an investor and wants to incorporate the batteries into its cars. Kleiner Perkins Caufield & Byers is said to be an investor.

EEStor, however, doesn't say a lot. In fact, the company rarely gives statements or issues releases, though it's one of the favorite topics of debate in the clean-tech world. For instance, EEStor didn't say it will begin qualification and testing on the battery units that are part of this deal. Lockheed did, in its own release (which, incidentally, doesn't include quotes from EEStor). EEStor didn't put a release out on the deal, though it put one out on Topfer.

Some people who have visited the company's facilities or reviewed its patents have come away believers. Others have become skeptics. EEStor had hoped to come out with products in 2007 but was forced to delay.

The Lockheed deal gives the company a shot of credibility. Critics, though, will likely remain skeptical until they see the devices. Defense contractors, after all, sign lots of deals like this.


Supercapacitor

Supercapacitors, also known as ultracapacitors or electrochemical double layer capacitors (EDLC), are electrochemical capacitors that have an unusually high energy density when compared to common capacitors, typically on the order of thousands of times greater than a high-capacity electrolytic capacitor. For instance, a typical D-cell sized electrolytic capacitor will have a storage capacity measured in microfarads, while the same size supercapacitor would store several farads, an improvement of about 10,000 times. Larger commercial supercapacitors have capacities as high as 5,000 farads.[1]

Supercapacitors have a variety of commercial applications, notably in "energy smoothing" and momentary-load devices. Some of the earliest uses were motor startup capacitors for large engines in tanks and submarines, and as the cost has fallen they have started to appear on diesel trucks and railroad locomotives.[2] More recently they have become a topic of some interest in the green energy world, where their ability to quickly soak up energy makes them particularly suitable for regenerative braking applications, whereas batteries have difficulty in this application due to slow charging times. If the LEES or EEStor devices can be commercialized, they will make an excellent replacement for batteries in all-electric cars and plug-in hybrids, as they combine quick charging, temperature stability and excellent safety properties.

MC and BC series supercapacitors (up to 3000 farad capacitance) produced by Maxwell Technologies
MC and BC series supercapacitors (up to 3000 farad capacitance) produced by Maxwell Technologies

http://en.wikipedia.org/wiki/Supercapacitor

A New Deal for EEStor

A delayed battery technology may indeed be on the way.

Good-bye batteries?: The startup EEStor says that it has technology that will store ten times as much energy as lead acid batteries.
Credit: Morris County Municipal Utilities Authority

Earlier this month, a stealthy startup that says its ultracapacitor-based energy storage system could make conventional batteries obsolete took a small step toward proving its many skeptics wrong.

The company, EEStor, based in Cedar Park, TX, has made bold claims about its technology but has so far failed to deliver a working commercial product. However, an agreement announced this month with Lockheed Martin, based in Bethesda, MD, suggests that the company could be making progress--at least enough to convince a major defense contractor that the technology has merit. The agreement gives Lockheed an exclusive international license to use EEStor's power system for military and homeland-security applications--everything from advanced remote sensors and missile systems to mobile power packs and electric vehicles. The technology, Lockheed said in a statement, "could lead to energy independence for the Warfighter."

Lockheed has not seen a working prototype but said that qualification testing and mass production of EEStor's system is planned for late 2008. Lockheed would not disclose the terms of the partnership. "We fully intend to work with EEStor this year to prototype and demonstrate this technology for the soldier," says Lionel Liebman, Lockheed's manager of program development in its applied research division. "We're looking at a lot of applications where the EEStor application can help."

EEStor says that its patented system is a nontoxic, safe, and lower-cost alternative to conventional electrochemical battery technologies, offering ten times the energy density of lead-acid batteries. The company also claims that its system allows rapid and virtually unlimited charging and discharging without significant degradation of the unit. (See "Battery Breakthrough?") But many experts have been skeptical, citing the difficulty of working with the material at the core of the company's system: a ceramic made of barium-titanate.

A lack of news from the company has only fed the skepticism. The last public announcement from EEStor came last January, when it revealed that it had made high purity barium-titanate powders on its first automated production line. But the company has so far failed to deliver units of its storage product to minority investor ZENN Motor, a company based in Toronto that plans to use it in electric vehicles. Originally, the devices were to have shipped in the first half of last year.


EEStor chief executive Richard Weir declined to comment on the development of the technology and the agreement with Lockheed. But he told Technology Review in an e-mail message that he's anticipating another "technical news release in the near future," at which time he would be open to discussing EEStor's progress in more detail.

ZENN chief executive Ian Clifford remains optimistic. "Every restatement of delivery time has been for good reasons," he says, suggesting that the Lockheed announcement and the due diligence that led to it "add credibility to the technology." He's now expecting delivery of the energy-storage unit in mid-2008. And it won't be a prototype, he emphasizes: it will be a mass-produced commercial product. "This is about commercialization, not hitting technology roadblocks. We're in constant contact with EEStor, with regular visits to their site. We always come away from every meeting much more excited that this is going to happen."

ZENN has already switched to a different motor in its current low-speed electric vehicle, partly in anticipation of the new energy storage technology. "We're first in line," says Clifford. "We understand we'll be taking the first product off the production facility being built right now."

Liebman, who says that he has visited EEStor's facility in Cedar Park and was impressed, also expressed confidence in the company. He notes that EEStor's approach so far allows for a rapid ramp-up in production. "I think it's very real," he says.

http://www.technologyreview.com/Biztech/20090/page2/