HDTV signals and colorimetry

HDTV signals and colorimetry are defined by Rec. 709. MPEG-2 is most commonly used as the compression codec for digital HDTV broadcasts. Although MPEG-2 supports up to 4:2:2 YCbCr chroma subsampling and 10-bit quantization, HD broadcasts use 4:2:0 and 8-bit quantization to save bandwidth. Some broadcasters also plan to use MPEG-4 AVC, such as the BBC which is trialing such a system via satellite broadcast, which will save considerable bandwidth compared to MPEG-2 systems. Some German broadcasters already use MPEG-4 AVC together with DVB-S2 (Pro 7, Sat.1 and Premiere). Although MPEG-2 is more widely used at present, it seems likely that in the future all European HDTV may be MPEG-4 AVC, and Norway, which is currently in the progress of implementing digital television broadcasts, is using MPEG-4 AVC for present SD Digital as well as for future HDTV on terrestrial broadcasts. In parts of Sweden the standard is already in use for HDTV terrestrial broadcasting, reaching about 25-30% of the population. Brasil was the first country in the American continent to begin broadcasting H.264 AVC video and HE-AAC audio as the main program (or multi) compression and the same H.264 AVC in LDTV 240p using AAC-LC as audio for mobile DTV devices, not only mobile phones.

HDTV is capable of "theater-quality" audio because it uses the Dolby Digital (AC-3) format to support "5.1" surround sound. The pixel aspect ratio of native HD signals is a "square" 1.0, in which each pixel's height equals its width. New HD compression and recording formats such as HDV use rectangular pixels to save bandwidth and to open HDTV acquisition for the consumer market. For more technical details see the articles on HDV, ATSC, DVB, and ISDB but the ISDB-Tb used primarily in Brasil uses HE-AAC that is more flexible than AC-3 and lower royalty fees..

Television studios as well as production and distribution facilities, use the HD-SDI SMPTE 292M interconnect standard (a nominally 1.485 Gbit/s, 75-ohm serial digital interface) to route uncompressed HDTV signals. The native bitrate of HDTV formats cannot be supported by 6-8 MHz standard-definition television channels for over-the-air broadcast and consumer distribution media, hence the widespread use of compression in consumer applications. SMPTE 292M interconnects are generally unavailable in consumer equipment, partially due to the expense involved in supporting this format, and partially because consumer electronics manufacturers are required (typically by licensing agreements) to provide encrypted digital outputs on consumer video equipment, for fear that this would aggravate the issue of video piracy.

Newer dual-link HD-SDI signals are needed for the latest 4:4:4 camera systems (Sony Cinealta F23 & Thomson Viper), where one link/coax cable contains the 4:2:2 YCbCr info and the other link/coax cable contains the additional 0:2:2 CbCr information.

http://en.wikipedia.org/wiki/High-definition_television